BLE 5.3 Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip

Product Description

BLE 5.3 Bluetooth Module with TI's SimpleLink™ CC2340R5 Chip


This newly released DL-CC2340-B Bluetooth Module was designed base on TI's SimpleLink™ CC2340R5 Bluetooth® Low Energy Chip, which uses a 48-MHz Cortex-M0+ Kernel, integrates up to 512 KB of flash memory, 36 KB of SRAM, with a built-in 48MHz 10PPM external high-speed clock, and 32.768Khz external low-speed clock.


This Bluetooth Module is compact in size (20PINs, 18*12mm), but has up to 15 universal I/O interfaces. It supports a variety of universal peripherals for all I/O ports of the CC2340R5 chip, which includes UART, SPI, I2C, timer, temperature sensor, battery voltage detection, built-in analog comparator, and 12-bit ADC analog-to-digital converter.


In fact, this DL-CC2340-B BLE module is suitable for use as an UART module, which can come with full-featured firmware (can be called via AT command), and support Peripheral & Central integration. The external MCU can be connected to the BLE module through the UART interface to achieve BLE data transmission. In AT command mode, UART can be used to send commands to modify scan intervals, scan timeouts, connection intervals, broadcast intervals, broadcast custom data, baud rates, etc. The MCU can also send switching commands to the BLE Peripherals through UART, which has broadcast and connection status, and can be connected by the BLE Central, serving as a bridge between the BLE Central and MCU for data transmission.  


In addition, to meet the security requirements of Bluetooth, this BLE module also take security issues into consideration, it also has AES-128 encryption and RNG functions. You can use TI’s SDK (CCStudio) for secondary development, and embed its complete applications by yourselves, which means you can purchase it as only a hardware BLE module (without firmware).


In terms of RF performance, these CC2340 BLE modules integrate RF balun internally, with simplified RF design, and reduced power consumption. The typical sensitivity can reach as high as -96.5 dBm @ 1 Mbps, and they can also achieve an output power up to +8 dBm. In order to meet the limit standards for RF power in various countries, the power of the BLE modules can be adjusted (ranging from -21 dBm to+8 dBm).


Features


● Temperature: Working Temperature Range: -40~85ºC, suitable for various applications, even harsh environments

● Transmitting Power: Adjustable range of -21~+8 dBm, in compliant with limit standards for RF power in various countries

● Low Power Consumption: It has a low RX current of 5.3mA, and a standby current of less than 800nA, which can greatly increase the lifespan of the battery.

● Excellent Performance:

   -102dBm sensitivity (Bluetooth ® Low Energy 125 kbps)

   -96.5dBm sensitivity (Bluetooth ® Low Energy 1 Mbps)


Download Center

DL-CC2340-B Brief Introduction V1.0

DL-CC2340-B UART BLE Transceiver Module DataSheet V1.0


Hardware Parameters
Model No. DL-CC2340-A / DL-CC2340-B
Dimension 26.5x18 mm / 18x12 mm
Chip Model TI CC2340R5
Development Method Secondary Development / AT Command
Module Pin QTY 40 PIN (25 GPIO) / 20 PIN (15 GPIO)
Antenna PCB antenna + IPEX / PCB antenna + external PAD
Working Voltage (DC) 1.75~3.8V
Working Temperature -40 ℃ ~ +85 ℃
Storage Temperature -40 ℃ ~ +85 ℃
Wireless Characteristics
Bluetooth Version Bluetooth 5.3 supported
Frequency Range 2402-2480 MHz (2.4G ISM radio band)

Modulation Mode 

GFSK
Transmission Power -21 dBm ~ +8 dBm (can be programed via software)
Receiving Sensitivity 96 dBm (typical value @ 1 Mbps)
Transparent Mode Central / Peripheral
Communication Range 70 meters (open area)


Power Consumption Parameters
Active-Mode RX 5.3 mA
Active-mode TX

5mA @ 0dB

12mA @ +8dBm

Sleep State

sleep state 0.7-µA avg (RTC running and RAM/CPU holding)
Running 2.6mA active mode
Data Transmission to be updated

Software Parameters
Supported Protocols

• Bluetooth® 5.3 Low Energy

• Zigbee® 1 

• SimpleLink™ TI 15.4-stack 1

OTA

available

Peripheral & Central

Peripheral & Central


Pin Definitions

DL-CC2340-B

DL-CC2340-A

No PIN Type Description
1 DIO8 Digital

GPIO

2 DIO9 Digital GPIO
3 DIO10 Digital

GPIO

4 DIO11 Digital

GPIO

5 DIO12 Digital

GPIO

6 DIO13 Digital GPIO
7 DIO14 Digital

GPIO

8

DIO15 Digital

GPIO

10 DIO18 Digital GPIO
11 DIO19 Digital GPIO
12 DIO20

Digital or Analog

GPIO,analog capability
13 DIO21 Digital or Analog GPIO,analog capability
16 VDD Power 1.8V to 3.8V DIO supply
17 GND Power Ground
18 DIO16 Digital GPIO, SWD interface: mode select or SWDIO, high-drive capability
19 DIO17 Digital GPIO,SWD interface: mode select or SWDIO,high-drive capability
20 RESET Digital Reset, active low. No internal pullupresistor
22 DIO22 Digital or Analog GPIO, analog capability
23 DIO23 Digital or Analog GPIO, analog capability
24 DIO24 Digital or Analog GPIO, analog capability
25 DIO25 Digital or Analog
GPIO, analog capability
31 DIO0 Digital or Analog GPIO, analog capability
32 DIO1 Digital or Analog GPIO, analog capability
33 DIO2 Digital or Analog GPIO, analog capability
36 DIO5 Digital or Analog GPIO, analog capability
37 DIO6 Digital or Analog GPIO, analog capability
38 DIO7 Digital or Analog GPIO, analog capability
39 GND Power GPIO, analog capability

9. NC    14.NC

15. NC   21.NC

26. NC   27.NC

8. NC    29.NC

30. NC    34.NC

35. NC    40.NC

NC NC


Module Size

DL-CC2340-B

DL-CC2340-A

Application Connection Diagram


Typical Applications:

Sports & Health: Activity Tracker, Pedometers, Sports Measurement (running, cycling, golf), etc.

Smart Home: Socket Improvement, Remote Control Switch, Smart Lighting, Smart Locks, Smart Curtains, Thermometer and Hygrometer, Smart Scale, Environmental Monitoring, Smart Detector, Pet Supervision, etc.

Health and Medical: Medical Detection/Tracking (heart rate, blood pressure, blood oxygen, pulse, body temperature), Blood Glucose Monitoring, Insulin Pump, Medical Sensor Patch

Infant Care: Real-time Temperature Detection, Smart Crib, Anti-lost

Toys: Interactive Remote-control Toys, Robots, Aircraft, Toy cars, Anti-lost devices

Vehicle Electronics: Tire Pressure Monitoring System (TPMS), Automatic Car Lock, Parking Record, Electric Vehicle Anti-theft Device, Data Collection and Monitoring

Automation: Beacons, Electronic Labels, Asset Management, Cold Chain Logistics, Industrial Control,Electronic Shelf Label, Electronic Sales Terminals

Smart Building: Building Security, HVAC, Lighting

Personal Care: Electric Toothbrush, Electric Shaver, Facial Cleanser

Games, Remote Control: Game Controllers, Voice Remote Control, Toys

Electronic Product: Keyboard/Mouse (non-USB type), Printer, Storage


Product Tags

RF module, Wireless Module, BLE Module, Wireless Module,  UART Module, TI,  CC2340, CC2340R5, SimpleLink, TPMS

UART Wireless FSK Transceiver Module Base on CMT2310 RF Chip

433Mhz UART Wireless Transceiver Module with PAN3028 Chip

433Mhz High Power UART Wireless Transceiver Module with PAN3028 Chip

433Mhz Wireless Transparent SoC Transceiver Module TI CC1310 Chip

868MHz/915MHz Transparent UART Transceiver Module with TI CC1310 Chip