DL-CC1310-B Wireless Module is a SoC Transceiver Module (UART Module) with AT command, which was developed based on Texas Instruments' CC1310F128RHBR RF chip. It combines an integrated RF Controller (Cortex®-MO) and a powerful Arm® Cortex®-M3 Processor, which is ideal to use especially for battery power IoT applications.

DL-CC2340-B BLE module is designed base on TI's SimpleLink™ wireless series CC2340R5 Bluetooth® Low Energy Chip, which uses a 48-MHz Cortex-M0+ kernel, integrates up to 512 KB of flash memory, 36 KB of SRAM,and has up to 15 GPIOs. Moreover, this Bluetooth Low Energy module is equipped with a built-in 48MHz 10PPM external high-speed clock, and 32.768Khz external low-speed clock.

This DL-P3028MPA RF module is a high-power UART Transceiver Module with PA, it was designed base on PAN3028 high-performance RF chip and built-in HC32L130 low-power MCU. It is an UART Module with AT command, which supports a maximum power output of 32dBm and a sensitivity of -140dBm; it is an effective wireless module which can provide excellent RF performance and strong anti-interference performance in the 398-510MHz frequency band.

DL-RTM300-B RF Module is an UART wireless serial port module with AT commands. It combines an integrated RF Controller with ARM Cortex-M0 32-bit core, 64kB on-chip Flash, 8kB on-chip SRAM, and supports hardware parity check. The Clock Speed of the main frequency can reach up to 48MHz. The high efficiency of receiving sensitivity enables this RF module to have excellent RF performance and strong anti-interference ability in the 420-510MHz/860-950MHz frequency bands.

This DL-P3028M RF module is an UART Transceiver Module, which was designed base on high-performance PAN3028 RF chip and built-in HC32L130 low-power MCU. It is an UART Module with AT command, which supports a maximum power output of 22dBm and a sensitivity of -140dBm; it is an effective wireless module which can provide excellent RF performance and strong anti-interference performance in the 398-510MHz frequency band.

This DL-CC1310-B Wireless Module supports Narrow-band Communication, Direct Sequence Spread Spectrum (DSSS), Long-range Transmission and High-efficiency Communication. Its fully functional AT Commands support any Serial Baud Rate setting from 1920bps to 256000bps, which can greatly improve the communication efficiency with up to -124dBm receiver sensitivity.