This DL-A7149-S FSK Transceiver Module was designed base on AMICCOM A7149 RF chip, which delivers an ultra-low power consumption of 1.8mA, and -120dBm high receiving sensitivity, will be ideal for battery-powered long-distance wireless transmission applications.

DL-RTM300-B RF Module is an UART wireless serial port module with AT commands. It combines an integrated RF Controller with ARM Cortex-M0 32-bit core, 64kB on-chip Flash, 8kB on-chip SRAM, and supports hardware parity check. The Clock Speed of the main frequency can reach up to 48MHz. The high efficiency of receiving sensitivity enables this RF module to have excellent RF performance and strong anti-interference ability in the 420-510MHz/860-950MHz frequency bands.

This DL-A6601PA-B wireless transceiver module is a high-power RF module based on the ASR6601 chip solution with LoRa modulation, which integrates a 48MHz main frequency Cortex-M4 low-power core. While this ASR6601 SOC chip is an MCU with RF encapsulated, with higher integration than the SPI+MCU solution, but smaller size.

The 868/915Mhz RFM95 Wireless Transceiver Moduless feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

DL-LLCC68-S RF module has high receiving sensitivity of -129dBm@LoRa, ultra-low receiving current and dormant current, the transmit power can be configured through software, and the maximum power can reach +22dBm. Compared with traditional modulation technology, LoRa™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem of distance, anti-interference and power consumption that traditional design schemes cannot take into account at the same time.

DL-SX1278PA is a high power 433Mhz LoRa Transceiver Module, which was developed based on Semtech's RF chip SX1278. For long-range transmission and better coverage concern, a power amplifier (PA) and a low noise amplifier (LNA) are integrated into this LoRa module, which makes its output power up to 30dBm (1W) and receiving sensitivity up to -149dBm